Skinny Ribbed Pillar Mould

30.00 лв BGN

A ribbed pillar designed for candle holders. Due to its small base, this candle will not be able to stand on its own. To use with a candle holder, insert the smallest, unribbed part of the candle firmly into the candle holder. The base of the candle measures at 1.8cm, allowing it to fit into candle holders with an internal width of about 2cm.

Our acrylic candle moulds are an essential tool for anyone looking to create professional-grade candles at home. Made from acrylic plastic, these moulds are durable, easy to use, and suitable for use with a variety of waxes including soy wax, beeswax, and paraffin. They are impact-resistant and easy to clean with a soft brush, making them a practical choice for both beginners and experienced candle makers. Whether you're a candle making novice or an expert, these acrylic moulds are a must-have for anyone looking to make their own candles.

To use this candle mould, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Use blu tack to cover the wick hole to prevent leakage before pouring melted wax into the mould. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Ensure you fill the wax all the way to the top for the tapered base. Allow your candle to cure overnight before carefully unmoulding it. If the candle gets stuck, squeeze around the mould to release the candle from the sides.

Kindly be aware that this candle mould is slightly tapered to facilitate easy demoulding. Specifically, the candle is wider at the top. If the candle had a uniform shape, it would likely encounter difficulties getting unstuck from the acrylic mould.

Specifications

Finished product: 26cm (H) x 2.2cm (W) x 2.2cm (L)

Base: 1.7cm wide

Wax volume: 75g

Cotton wick recommendation: 4 ply

All measurements are approximate and will vary depending on the type of wax used and how much fragrance oil is added.

Mould Care

Clean with warm water and mild soap after every use and store in a dust-free environment.

How To Use

Acrylic PVC Candle Moulds:

To use this candle mould, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Use blu tack to cover the wick hole to prevent leakage before pouring melted wax into the mould. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it. If the candle gets stuck, squeeze around the mould to release the candle from the sides.

Silicone Candle Moulds:

To use our candle moulds, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Then, pour in your melted wax and let it cool until it hardens. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it.

Concrete Trays & Vessels:

To make the most of your vessel mould, follow these steps:

  • Preparation: Begin by gathering your selected material and ensure it's mixed according to the manufacturer's instructions.
  • Pouring: Carefully fill the mould with your chosen material, ensuring it reaches the top.
  • Air Bubble Removal: For a smoother finish, gently tap the mould on a sturdy surface to encourage any trapped air bubbles to rise to the surface.
  • Curing: Adhere to the recommended curing time for your chosen material.
  • Demoulding: Once the material has set and cured, carefully flex and remove the mould to unveil your creation.
  • If your tray or vessel will be used for candles, it is vital to seal it with a heat-resistant sealer. Apply at least two coats to both the interior and exterior of the vessel. Ensure the sealant is fully dry before pouring in the wax.


Shipping

Standard (Australia):

  • 3-7 business days
  • $12 shipping fee

Express (Australia)

  • 1-3 business days
  • $17

Standard (New Zealand)

  • 4-14 business days
  • $20

DHL Express (International)

  • 3-7 business days via DHL Express
  • Calculated based on location and weight
Returns & Refunds

Parcel Claims:

Report missing or damaged items within 24 hours of delivery to be eligible for store credit or a replacement. Include proof of purchase and photographic evidence. Contact us at info@mykacandlesandmoulds.com.

Moulds Disclaimer:

Expect slight imperfections in our handmade silicone moulds, which won't affect the final product. For unlevel moulds, adjust using simple supports.

Exchanges/Refunds:

No alterations, cancellations, exchanges, or refunds after purchase except as covered under parcel claims.

Lost/Damaged Parcels:

If a package is lost or damaged, contact us immediately for assistance with a claim.

For detailed information on our policies, please visit our full Returns & Refunds Policy.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)