Large Wavy Mould
Exclusive to Myka Candles & Moulds and hand-poured in Australia using premium platinum-cure silicone. Ready to be shipped.
Crafted from high-quality platinum-cure silicone, these custom moulds are the perfect tool to help you create beautiful and unique candles for any occasion. Platinum-cure silicone is known for its durability and tear-resistance. It can withstand high temperatures up to 230°C, but it is not recommended to expose them to excessive heat for long periods of time. In comparison to regular silicone moulds, moulds made with platinum-cure silicone are more long-lasting and has a shelf life of more than 30 years.
This mould can be wicked multiple ways. You can choose to wick through the left side only or double wick it, with the second wick going in the middle of the curve. Alternatively, you can single wick the mould by pouring in wax half way, then wicking it through the top left and running the wick along the middle of the curvy design, ensuring that it is centred. We recommend testing to find which way works best for you.
Once the mould is wicked, pour in melted wax and allow it to cure overnight before carefully unmoulding the candle. For best results, preheat your mould with a heat gun prior to pouring to prevent jump lines and air bubbles getting trapped.
Finished product: 13.5cm (H) x 14cm (W) x 3cm (L)
Wax volume: 260g
Cotton wick recommendation: 6 ply
All measurements are approximate and will vary depending on the type of wax used and how much fragrance oil is added.
Clean with warm water and mild soap after every use and store in a dust-free environment. Do not over-stretch or use any abrasive tools or fingernails.
Disclaimer: mould is poured and trimmed by hand and therefore may have some minor exterior imperfections.
Photo credit: @blowmywick_