Scalloped Heart Vessel Mould
Couldn't load pickup availability
Exclusive to Myka Candles & Moulds and hand-poured to order in Australia using premium platinum-cure silicone. Please allow up to 1 week to process.
Craft elegant heart-shaped concrete planters and candle jars effortlessly with the Scalloped Heart Vessel Silicone Mould. Designed for flawless results, this premium platinum-cure silicone mould ensures smooth finishes, elevating your creations with a sleek, modern aesthetic. Perfect for DIY enthusiasts and professional crafters.
Why Choose Platinum-Cure Silicone?
- Exceptional Durability: Resists tears and handles temperatures up to 230°C.
- Extended Lifespan: Lasts over 30 years with proper care, far outperforming regular tin-cure silicone moulds.
- Effortless Release: Flexible material ensures easy demolding for both concrete and wax projects.
- Versatile and Multi-Purpose: Create stunning concrete planters, candle jars, or unique decorative items.
Features:
- Premium Quality Silicone: Smooth, durable, and tear-resistant for consistent results.
- Elegant Scalloped Design: Adds a modern touch to your creations.
- Eco-Friendly and Reusable: Long-lasting performance for sustainable crafting.
- 3D-Printed Support Shell: Maintains shape for flawless, professional designs.
Specifications:
- External dimensions: 5cm (H) x 14.5cm (W) x 12cm (L)
- Internal dimensions: 4.5cm (H) x 14cm (W) x 11cm (L)
- Wall thickness: 0.5cm
Mould Perfomance & Storage
The physical life of the mould depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mould detail, while casting non-abrasive materials, such as wax, will not affect mould detail. Do not over-stretch or use any abrasive tools or fingernails when demoulding.
Before storing, the mould should be cleaned with a soap solution and fully dry. Two part moulds should be assembled. Always store silicone moulds on a level surface in their original shape and never leave them turned inside out. Keeping the mould in its intended form prevents the silicone from warping due to prolonged exposure to unnatural positions. Clean with warm water and mild soap after every use and store in a dust-free environment.
Disclaimer: This mould is poured and trimmed by hand and therefore may have some minor exterior imperfections.
How To Use
Silicone Candle Moulds:
Thread the wick through the centre of the mould and secure it in place with a wick holder. For best results, gently warm the inside of the mould with a heat gun before pouring, especially for designs with fine details, lettering, deep textures, or narrow areas. This helps the wax flow into small details more evenly and can reduce trapped air bubbles and visible pour lines.
Pour in your melted wax and allow it to cool and fully set before carefully unmoulding. Depending on the wax used, a second pour may be required to level the base. Always keep the heat gun moving and avoid overheating the silicone.
Acrylic PVC Candle Moulds:
Thread the wick through the wick hole and secure it with a wick holder. Seal the hole with Blu Tack to prevent leaking, then pour in your melted wax. A second pour may be needed depending on the wax used. Allow the candle to set fully before unmoulding. If needed, gently squeeze the sides of the mould to help release the candle.
Concrete Trays & Vessels:
Mix your chosen casting material according to the manufacturer’s instructions, then pour it into the mould. Gently tap the mould to help release trapped air bubbles and allow the piece to cure fully before demoulding.
If using the finished vessel for candles, apply at least two coats of a suitable heat-resistant sealer to the inside and outside. Allow the sealer to dry and cure completely before adding wax.
Mould Performance & Storage
Our silicone moulds are handcrafted from premium platinum-cure silicone, chosen for its durability, flexibility, tear resistance, and long lifespan. While the silicone can withstand high temperatures, prolonged exposure to excessive heat should be avoided.
Mould life will vary depending on the material used and frequency of casting. Abrasive materials such as concrete may gradually wear down fine details, while non-abrasive materials such as wax are much gentler on the mould. Avoid overstretching and do not use sharp tools or fingernails when demoulding.
Before storing, wash the mould with a mild soap solution and allow it to dry completely. Two-part moulds should be reassembled and stored flat in a cool, dry place to help maintain their shape.
Please note: Each mould is poured and trimmed by hand, so minor exterior imperfections may occur.
Shipping
Processing Times:
Our exclusive silicone moulds are hand-poured to order. Please allow approximately 3 business days for processing in addition to the estimated shipping time.
Larger custom orders, high-volume orders, or busy periods may require additional processing time. If your order is time-sensitive, please contact us before purchasing.
Standard (Australia):
- 3-7 business days
- $12 shipping fee
Express (Australia)
- 1-3 business days
- $17
Standard (New Zealand)
- 4-14 business days
- $20
DHL Express (International)
- 3-7 business days via DHL Express
- Calculated based on location and weight
Returns & Refunds
Parcel Claims:
Report missing or damaged items within 24 hours of delivery to be eligible for store credit or a replacement. Include proof of purchase and photographic evidence. Contact us at info@mykacandlesandmoulds.com.
Moulds Disclaimer:
Expect slight imperfections in our handmade silicone moulds, which won't affect the final product. For unlevel moulds, adjust using simple supports.
Exchanges/Refunds:
No alterations, cancellations, exchanges, or refunds after purchase except as covered under parcel claims.
Lost/Damaged Parcels:
If a package is lost or damaged, contact us immediately for assistance with a claim.
For detailed information on our policies, please visit our full Returns & Refunds Policy.
