New arrival
New arrival

Heart Cuboid Pillar Mould

327.00 SEK

Exclusive to Myka Candles & Moulds and hand-poured to order in Australia using premium platinum-cure silicone. Please allow up to 5 business days to be processed. 

Create elegant pillar candles with our Heart Cuboid Pillar Silicone Mould, featuring a repeating heart motif designed to produce clean, crisp detail.

Each mould is handmade using premium platinum-cure silicone, chosen for its excellent tear strength, flexibility, and long-term durability. Platinum silicone is well suited to candle making and, when properly cared for, has an exceptionally long shelf life compared to tin- or peroxide-cured alternatives.

How to Use

  • Pierce a small wick hole in the centre of the mould

  • Thread the wick through and secure it with a wick holder

  • Place the mould into the included support shell to maintain shape and stability

  • Pour wax at your recommended temperature at an angle to prevent bubbles

  • Allow the candle to fully cure before demoulding

For best results, lightly preheat the mould with a heat gun prior to pouring. This helps minimise jump lines and reduces the chance of air bubbles becoming trapped in the design.

Demoulding Tip: Once fully cured, apply a small amount of lubrication (such as liquid hand soap) to the outside base of the mould to reduce friction. Gently peel the silicone away from the candle and invert to release.

Specifications

Finished product: 24cm (H) x 2.6cm (W) x 2.6cm (L)

Wax volume: 140g

Cotton wick recommendation: 6 ply

All measurements are approximate and will vary depending on the type of wax used and how much fragrance oil is added.

Mould Perfomance & Storage

The physical life of the mould depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mould detail, while casting non-abrasive materials, such as wax, will not affect mould detail. Do not over-stretch or use any abrasive tools or fingernails when demoulding.

Before storing, the mould should be cleaned with a soap solution and fully dry. Two part moulds should be assembled. Moulds should be stored on a level surface in a cool, dry environment to maintain its original shape.

Disclaimer: This design is 3D printed using PLA filament and therefore will have print lines on the finished product. Our custom moulds are poured and trimmed by hand and therefore may have some minor exterior imperfections.

How To Use

Acrylic PVC Candle Moulds:

To use this candle mould, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Use blu tack to cover the wick hole to prevent leakage before pouring melted wax into the mould. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it. If the candle gets stuck, squeeze around the mould to release the candle from the sides.

Silicone Candle Moulds:

To use our candle moulds, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Then, pour in your melted wax and let it cool until it hardens. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it.

Concrete Trays & Vessels:

To make the most of your vessel mould, follow these steps:

  • Preparation: Begin by gathering your selected material and ensure it's mixed according to the manufacturer's instructions.
  • Pouring: Carefully fill the mould with your chosen material, ensuring it reaches the top.
  • Air Bubble Removal: For a smoother finish, gently tap the mould on a sturdy surface to encourage any trapped air bubbles to rise to the surface.
  • Curing: Adhere to the recommended curing time for your chosen material.
  • Demoulding: Once the material has set and cured, carefully flex and remove the mould to unveil your creation.
  • If your tray or vessel will be used for candles, it is vital to seal it with a heat-resistant sealer. Apply at least two coats to both the interior and exterior of the vessel. Ensure the sealant is fully dry before pouring in the wax.
Shipping

Standard (Australia):

  • 3-7 business days
  • $12 shipping fee

Express (Australia)

  • 1-3 business days
  • $17

Standard (New Zealand)

  • 4-14 business days
  • $20

DHL Express (International)

  • 3-7 business days via DHL Express
  • Calculated based on location and weight
Returns & Refunds

Parcel Claims:

Report missing or damaged items within 24 hours of delivery to be eligible for store credit or a replacement. Include proof of purchase and photographic evidence. Contact us at info@mykacandlesandmoulds.com.

Moulds Disclaimer:

Expect slight imperfections in our handmade silicone moulds, which won't affect the final product. For unlevel moulds, adjust using simple supports.

Exchanges/Refunds:

No alterations, cancellations, exchanges, or refunds after purchase except as covered under parcel claims.

Lost/Damaged Parcels:

If a package is lost or damaged, contact us immediately for assistance with a claim.

For detailed information on our policies, please visit our full Returns & Refunds Policy.
View details