Christmas Tree Vessel Mould

CHF 94.00

4 reviews

Exclusive to Myka Candles & Moulds and hand-poured to order in Australia using premium platinum-cure silicone. Please allow up to 5 business days to process.

Introducing our exclusive Christmas Tree Candle Vessel Mould – a true work of art meticulously designed, 3D printed, and handpoured within our studio. You won't find this exquisite mould anywhere else, as each one is created to order by us using the highest-grade platinum-cure silicone.

Precision and passion come together in the crafting of this handmade vessel mould, opening the door to boundless creative possibilities. This mould is compatible with various materials, including concrete, hydrostone, jesmonite, plaster, resin, and more.

To make the most of your vessel mould, follow these steps:

• Preparation: Begin by gathering your selected material and ensure it's mixed according to the manufacturer's instructions.

• Pouring: Carefully fill the mould with your chosen material, ensuring it reaches the top.

• Air Bubble Removal: For a smoother finish, gently tap the mould on a sturdy surface to encourage any trapped air bubbles to rise to the surface.

• Curing: Adhere to the recommended curing time for your chosen material.

• Demoulding: Once the material has set and cured, carefully flex and remove the mould to unveil your creation.

Before making a candle in your vessel, it is vital to seal it with a heat-resistant sealer. Apply at least two coats to both the interior and exterior of the vessel. Ensure the sealant is fully dry before pouring in the wax. We recommend using 3-5 wicks for an even burn. Keep in mind that the vessel's diameter varies from top to middle to bottom, so you may need different-sized wicks to ensure an efficient and even burn.

With our Christmas Tree Candle Vessel Mould, you're not only creating artistry but also enhancing the festive spirit with your personalized candle creations. Get ready to illuminate the holiday season with your unique touch!

Specifications

Finished product: 

External - 5cm (H) x 16.5cm (W) x 20cm (L)

Internal - 4cm (H) x 14cm (W) x 16.5cm (L)

Wax volume: 390g

Wick recommendation: CDN 10

Mould Care

Always store silicone moulds in their original shape and never leave them turned inside out. Keeping the mould in its intended form prevents the silicone from tearing due to prolonged exposure to unnatural positions. Clean with warm water and mild soap after every use and store in a dust-free environment.

Disclaimer: mould is poured and trimmed by hand and therefore may have some minor exterior imperfections.

 

Photo credit: @candlesco_au

How To Use

Acrylic PVC Candle Moulds:

To use this candle mould, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Use blu tack to cover the wick hole to prevent leakage before pouring melted wax into the mould. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it. If the candle gets stuck, squeeze around the mould to release the candle from the sides.

Silicone Candle Moulds:

To use our candle moulds, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Then, pour in your melted wax and let it cool until it hardens. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it.

Concrete Trays & Vessels:

To make the most of your vessel mould, follow these steps:

  • Preparation: Begin by gathering your selected material and ensure it's mixed according to the manufacturer's instructions.
  • Pouring: Carefully fill the mould with your chosen material, ensuring it reaches the top.
  • Air Bubble Removal: For a smoother finish, gently tap the mould on a sturdy surface to encourage any trapped air bubbles to rise to the surface.
  • Curing: Adhere to the recommended curing time for your chosen material.
  • Demoulding: Once the material has set and cured, carefully flex and remove the mould to unveil your creation.
  • If your tray or vessel will be used for candles, it is vital to seal it with a heat-resistant sealer. Apply at least two coats to both the interior and exterior of the vessel. Ensure the sealant is fully dry before pouring in the wax.


Shipping

Standard (Australia):

  • 3-7 business days
  • $12 shipping fee

Express (Australia)

  • 1-3 business days
  • $17

Standard (New Zealand)

  • 4-14 business days
  • $20

DHL Express (International)

  • 3-7 business days via DHL Express
  • Calculated based on location and weight
Returns & Refunds

Parcel Claims:

Report missing or damaged items within 24 hours of delivery to be eligible for store credit or a replacement. Include proof of purchase and photographic evidence. Contact us at info@mykacandlesandmoulds.com.

Moulds Disclaimer:

Expect slight imperfections in our handmade silicone moulds, which won't affect the final product. For unlevel moulds, adjust using simple supports.

Exchanges/Refunds:

No alterations, cancellations, exchanges, or refunds after purchase except as covered under parcel claims.

Lost/Damaged Parcels:

If a package is lost or damaged, contact us immediately for assistance with a claim.

For detailed information on our policies, please visit our full Returns & Refunds Policy.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jill
This mould exceeds my expectations!

Excellent quality and the customer service is top notch! I have a few projects that I’m planning and I will not hesitate to order from here again!

J
Jill

Excellent quality mold and exceeds our expectations! Cannot wait to fill with wax!

T
Tamara

Beautiful mold! I love it thank you

J
Janice Huijsman

Christmas Tree Vessel Mould