Belle Mould

CHF 57.00

4 reviews

Exclusive to Myka Candles & Moulds and hand-poured in Australia using premium platinum-cure silicone. Ready to be shipped.

This handmade mould is crafted from platinum-cure silicone and features a slit on one side to assist with unmoulding. Platinum-cure silicone is known for its durability and tear-resistance. It can withstand high temperatures up to 230°C, but it is not recommended to expose them to excessive heat for long periods of time. In comparison to regular silicone moulds, moulds made with platinum-cure silicone are more long-lasting and has a shelf life of more than 30 years.

To use, simply start by piercing a hole in the center of the mould where you want the wick to come out. Thread the wick into the hole and align the two sides of the mould together before securing with clips. Pour in melted wax and allow it to cure overnight before carefully unmoulding the candle.

Please note that this mould is intentionally cut to make unmoulding easier. This, in turn, will leave a seam line on the candle, but it's appearance can be minimized by ensuring that both halves of the mould are aligned as perfectly as possible before pouring in your wax.

Specifications

Finished product: 17.5cm (H) x 6.5cm (W) x 6.5cm (L)

Wax volume: 220g

Cotton wick recommendation: 12 ply

All measurements are approximate and will vary depending on the type of wax used and how much fragrance oil is added.

Mould Care

Clean with warm water and mild soap after every use and store in a dust-free environment. Do not over-stretch or use any abrasive tools or fingernails.

Disclaimer: mould is poured and trimmed by hand and therefore may have some minor exterior imperfections.

 

Photo credit:Photo credit: @blowmywick_ & @glowquest_australia & @millacandleco

How To Use

Acrylic PVC Candle Moulds:

To use this candle mould, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Use blu tack to cover the wick hole to prevent leakage before pouring melted wax into the mould. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it. If the candle gets stuck, squeeze around the mould to release the candle from the sides.

Silicone Candle Moulds:

To use our candle moulds, simply start by threading the wick through the center of the mould and securing it in place with a wick holder. Then, pour in your melted wax and let it cool until it hardens. Depending on the type of wax you are using, you may need to perform a second pour to even out the surface of the candle. Allow your candle to cure overnight before carefully unmoulding it.

Concrete Trays & Vessels:

To make the most of your vessel mould, follow these steps:

  • Preparation: Begin by gathering your selected material and ensure it's mixed according to the manufacturer's instructions.
  • Pouring: Carefully fill the mould with your chosen material, ensuring it reaches the top.
  • Air Bubble Removal: For a smoother finish, gently tap the mould on a sturdy surface to encourage any trapped air bubbles to rise to the surface.
  • Curing: Adhere to the recommended curing time for your chosen material.
  • Demoulding: Once the material has set and cured, carefully flex and remove the mould to unveil your creation.
  • If your tray or vessel will be used for candles, it is vital to seal it with a heat-resistant sealer. Apply at least two coats to both the interior and exterior of the vessel. Ensure the sealant is fully dry before pouring in the wax.


Shipping

Standard (Australia):

  • 3-7 business days
  • $12 shipping fee

Express (Australia)

  • 1-3 business days
  • $17

Standard (New Zealand)

  • 4-14 business days
  • $20

DHL Express (International)

  • 3-7 business days via DHL Express
  • Calculated based on location and weight
Returns & Refunds

Parcel Claims:

Report missing or damaged items within 24 hours of delivery to be eligible for store credit or a replacement. Include proof of purchase and photographic evidence. Contact us at info@mykacandlesandmoulds.com.

Moulds Disclaimer:

Expect slight imperfections in our handmade silicone moulds, which won't affect the final product. For unlevel moulds, adjust using simple supports.

Exchanges/Refunds:

No alterations, cancellations, exchanges, or refunds after purchase except as covered under parcel claims.

Lost/Damaged Parcels:

If a package is lost or damaged, contact us immediately for assistance with a claim.

For detailed information on our policies, please visit our full Returns & Refunds Policy.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Christopher

Makes attractive candles ✔️👍

S
S.
My Myka Mould Collection

Stunning Belle mould. Trouble occurred with closing mould before pouring wax. Laundry pins works well. Perhaps mould closures could be enclosed with this mould. 2 weeks delivery seems reasonable from "Down Under" to U.S.A.

s
suezana trajcevski
Stunning quality candle moulds

Beautiful high quality candle moulds. Fantastic selection and service. Highly recommend!

S
Semira Arslanovic
Belle Mould

Another exquisite piece made by Mykacandlesandmoulds, they never seize to amaze me with their talent! Their mould are top of the range and would definitely recommend purchasing from them if you do choose to start your own business or if it’s just a DIY